Xerox Wide Format 6030 Software Manual page 73

If you select [Use application setting], a file name is specified based on the document
file name sent by the application to the printer driver.
The document file name that is sent by the application may differ from the actual file
name (which is displayed on the title bar). The maximum number of characters for the
file name that is sent by the application differs depending on the operating system:
For Windows 2000/XP, up to 32 single-byte characters (16 double-byte characters),
and for Windows 98/Me, up to 8 single-byte characters (4 double-byte characters).
The excess characters are automatically truncated. If a file name includes both the
single-byte and the double-byte characters, the file name may be illegal.
By selecting [Specify file name], you can specify the [File name].
•
[File name]
Up to 32 single-byte characters (16 double-byte characters) can be entered for the file
name. For Windows 98, up to 8 single-byte characters (4 double-byte characters) can be
entered.
•
[How to process existing file name]
Sets up the procedures in the event that a file with the same name exists in the folder.
You can select one of 3 options: [Open confirmation dialog], [Overwrite the existing
file], [Add a number to the file name and save it]. If you select [Open confirmation
dialog], the confirmation message "The same name file already exists. Do you want to
overwrite it?" appears. If you select [Overwrite the existing file], no confirmation
message appears and the file is overwritten and saved. If you select [Add a number to the
file name and save it], a hyphen and 3-digit serial number is suffixed. (Example: "aaa-
001")
If you select [Add a number to the file name and save it], and the number exceeds the
maximum of "-999", a message appears and the process is aborted. When the number
of characters including the 3-digit number exceeds the limit, the excess characters are
truncated from the end of the file name and the file is saved with a hyphen and the 3-
digit serial number.
•
[Add controller command]
This option can be selected when [Job Parameter Settings] on the [Default Settings] tab
is set at [On]. If [No] is selected, the file identifier will be ".tif". If [Yes] is selected, the
file identifier will be ".pjl", in which case, the created file cannot be edited with image
editing software. This file cannot be output to other printers.
2.2 Windows Driver Settings 65