Xerox Wide Format 6030 Software Manual page 65

Collate
Selects whether to print by page or by group when multiple copies are to be printed.
•
When [Collate] is set at ON
Prints the multiple copies in groups (1, 2, 3 ... 1, 2, 3).
•
When [Collate] is set at OFF
Prints the multiple copies by page (1, 1, 1 ... 2, 2, 2... 3,3,3...).
Print by Reverse Order
Prints multi-page documents in the reverse order, with the last page being printed first.
This parameter cannot be set if [2 up] or [4 up] has been specified for [Multi-up]
in the [Paper] tab.
Folder
Selects the method that the finisher is to fold the paper.
•
The printer settings are given priority when [According to Printer Settings] is selected.
•
This will be displayed even if a folder has not been installed optionally.
•
If the Simple Folder has been installed, only single direction folds will be carried out
regardless of the parameter set here.
•
Select any parameter other than [Off] when folding has been specified with the
DocuWide 5070 stacker.
The logical printer settings will be enabled when [According to Printer Settings]
has been selected.
2.2 Windows Driver Settings 57