[Header/Footer] Tab
This section explains the parameters available on the [Header/Footer] tab.
Position
Selects the position to print the header and footer.
•
The parameter set here will be saved in Windows Driver, so the same settings will be
available for the next time Windows Driver is started up.
Enter Text
Characters can be typed into the text box when this check box is set at ON. The entered
characters will be printed in the header or footer.
•
A maximum of 64 characters, including the date and time, can be entered in the text
box.
•
The character string entered in the text box will be saved in Windows Driver, so the
same settings will be available the next time Windows Driver is started up.
Date[yy/MM/dd]
The date of processing by the plotter will be printed in the header or footer if this check
box is set to ON.
•
The format is yy/mm/dd.
•
The parameter set here will be saved in Windows Driver, so the same settings will be
available the next time Windows Driver is started up.
This is not supported with DocuWide 2050.
2.2 Windows Driver Settings
61