Replacing The Toner Cartridge; Loading Staples - Xerox CopyCentre 133 Quick Reference Manual

Replacing the Toner Cartridge

The toner cartridge is a customer replaceable unit. After approximately 30,000 copies/
prints, the touch screen will display a message that it is time to replace the cartridge.
When ordering a new cartridge, use the following table to determine the correct reorder
code for your machine.
Instructions for replacing the toner cartridge are included with the replacement
cartridge and in the User Guide on the Documentation CD-ROM or on the website:
www.office.xerox.com/support
North and South America
Europe, Asia and Africa

Loading Staples

The finisher contains an automatic stapler. The stapler cartridge contains 5,000
staples. When the machine runs out of the staples, a message is displayed on the
touch screen. When this message is displayed, load a new staple case into the staple
cartridge by following the instructions included with the replacement cartridge or in the
User Guide on the Documentation CD-ROM or on the website:
www.office.xerox.com/support
NOTE: Load the correct staple case specified for the product model of the machine.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide
Country
All Countries
Part Number
6R1184
6R1183
6R1182
Replacing the Toner Cartridge
Comments
Only for selected Xerox
maintenance agreements
93