Auto Blending Solution; Configuring The Auto Blending Solution; Setting Up The Camera - Christie H Series User Manual

Auto blending solution

When the user needs to project large content on the wall, crop the content into X number of parts,
project them by X units, and use the blending function to blend all projection images into a complete
image.
Follow these steps to configure the auto blending solution.
1. Set Blending as the solution you want to configure (on page 10).
2. Set up the camera (on page 8) so it appears clearly in the target image area.
3. Set the boundaries (on page 9) of the projected image.
4. Perform calibration (on page 9) so the image clearly fills the target area.

Configuring the auto blending solution

Select the auto blending solution when you want to project large content on the wall.
1. To open a new project, from the Auto Warp homepage, select New.
2. From the Solution mode screen, select Blending.
3. Select Next.
4. From the Resolution Mode list, select the required resolution.
5. In the Layout field, select the type of blending.
• Horizontal blending = 1 Row x 2 Column
• Vertical blending = 2 Column x 1 Row
6. Under Network, double-click the IP address and modify the IP address as required.
7. Select Next.
8. Select Preview and check the image.
The blue line from the right image must exceed the yellow line from the left image. The yellow
line from the left image must exceed the blue line from the right image.
9. When the overlap area is correct, select OK.

Setting up the camera

Set up the camera so the image appears clearly within the target image area.
1. To open the camera, from the Auto Warp homepage, select Camera.
2. From the Camera list, select Logitech HD Pro Webcam C920.
3. Select Open Camera.
4. To increase or decrease the magnification of the image so it fits within the image box, adjust
the Zoom slider.
5. To move the image, use the T+/- or P+/- controls .
H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp
020-102080-05 Rev. 1 (01-2024)
Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
10