Christie H Series User Manual page 15

Hide thumbs Also See for H Series:

Table of Contents

Calibration starts.

2. If the image is fine, close the application.

3. If the image is not as expected, to recalibrate the image, select Re-calibration.

a) Adjust the sharpness value until the white area is a full solid area.

b) When the image is as expected, select Next.

c) Adjust the sharpness value again until the white area is a full solid area.

d) Select Done.

Auto correction starts.

e) If the image is as expected, return to the Boundary page (on page 9) to compare the

image.

If the image is still not as expected, repeat step 3 to retry recalibrating the image again.

To save time, recalibrate the image with photos stored on the computer.

H Series, HS Series, GS Series, and Inspire Series User Guide–Auto Warp

020-102080-05 Rev. 1 (01-2024)

If printed, please recycle this document after use.

Auto blending and stacking solution

Table of Contents