2
2-11 Using Calibrator
For this calibration to take effect, the calibration set must be associated with one
N
:
OTE
or more output profiles. There is no need to make any new associations for the default
calibration set, since it is already associated with the default output profile.
4. In the Generate Measurement Page pane, click Print.
The Print Options dialog box appears.
5. Choose the Page Type, Paper Size, and Input Tray to use for the measurement page and
click Print.
In the Page Type menu, choose either 34 or 21 Sorted Patches.
In the Paper Size menu, the menu will automatically choose LTR/A4 for 21 Sorted
Patches or 11
In the Input Tray menu, choose the paper source.
6. Retrieve the measurement page from the copier/printer.
7. In the Get Measurements pane, click Measure.
The Measurement Options dialog box appears, displaying the specified Page Type and
Paper Size options.
17/A3 for 34 Sorted Patches.
x