Calibrating The Fiery With The Dtp32 - Xerox DocuColor 12 Color Manual

2
2-14 Color Calibration

Calibrating the Fiery with the DTP32

Using the DTP32, you can quickly measure color patches and download these
measurements to the Fiery using ColorWise Pro Tools Calibrator.
T F
O CALIBRATE THE IERY USING THE
1. Start Calibrator.
For instructions on starting Calibrator, see
2. In the Select Measurement Method pane, choose X-Rite DTP32.
3. In the Check Print Settings pane, choose the desired calibration set.
If more than one option appears, choose the appropriate calibration set for the type of
media you will use most often.
For this calibration to take effect, the calibration set must be associated with one
N :
OTE
or more output profiles. The default calibration set is already associated with the
default output profile, so there is no need to make any new associations.
4. In the Generate Measurement Page pane, click Print.
The Print Options dialog box appears.
5. Choose the appropriate Page Type, Paper Size, and Input Tray to use for the
measurement page and click Print.
For Page Type, choose either 34 or 21 Sorted Patches.
In the Paper Size menu, the menu will automatically choose LTR/A4 for 21 Sorted
Patches or 11
For Input Tray, specify the paper source.
DTP32
17/A3 for 34 Sorted Patches.
x
page 2-6.