Calibrating The Dtp41 - Xerox DocuColor 12 Color Manual

A
A-5 Color Measurement Instruments
6. Turn on the computer.
7. Calibrate the X-Rite DTP41 using ColorWise Pro Tools (see the following section).
8. Calibrate the Fiery using ColorWise Pro Tools and the DTP41 (see

Calibrating the DTP41

For the best color accuracy, you should calibrate the X-Rite DTP41 spectrophotometer
every time you calibrate the Fiery. You can initiate the calibration sequence in
ColorWise Pro Tools Calibrator as part of the process of Fiery calibration. The
computer may also prompt you that it is necessary to calibrate the spectrophotometer.
Alternatively, you can initiate the DTP41 calibration process using the Instrument
button on the DTP41. For more information on this method, see the documentation
that came with the X-Rite DTP41.
Multiple users can be connected to one Fiery server with ColorWise Pro Tools, but
only one user at a time can use the Calibrator module. An error message appears if you
try to calibrate when another user is already using ColorWise Pro Tools to calibrate.
You will need the Color Reflection Reference strip that is included with the
spectrophotometer. Remove the strip from its protective envelope, handling it by the
edges only. Keep the strip free of dust and smudges and always store it in the protective
envelope.
T X-R
O CALIBRATE THE ITE
1. Connect the spectrophotometer to the computer and turn on power (see
2. Start Calibrator.
For instructions on starting Calibrator, see
3. Choose DTP41 as the measurement method.
DTP41
page
page 2-6.
2-10).
page A-2).