Xerox DocuColor 12 Color Manual page 108

A
A-10 Color Measurement Instruments
Unused connector
Connect to serial port
4. Plug the small connector on the adapter cable into the side of the X-Rite DTP32 and
Small connector
AC adapter
5. Turn on the computer.
6. Calibrate the DTP32 (see the following section).
7. Calibrate the Fiery using ColorWise Pro Tools (see
For a Mac OS computer, connect the 8-pin mini-DIN plug directly into the serial port
of the computer.
For Mac OS computers with a USB port (for example, an iMac), you need an
N :
OTE
adapter to connect the DTP32 to your computer. For information on supported
adapters, see the X-Rite, Inc. web site (www.x-rite.com).
plug the AC adapter into a wall outlet.
page 2-21).