Xerox DocuColor 12 Color Manual page 107

A
A-9 Color Measurement Instruments
T
O CONNECT THE
1. Turn off the computer.
2. Plug the square end of the interface cable (looks like a modular phone plug) into the
3. Attach the connector to the computer.
Unused connector
Connect to computer
Connect to adapter
X-R DTP32
ITE TO THE COMPUTER
I/O port on the side of the X-Rite DTP32.
For a Windows computer, insert the 8-pin mini-DIN end of the interface cable into
the 9-pin DB9 Connector cable adapter. Insert the 9-pin end into the COM1 or
COM2 port on the computer and tighten the screws. If the available port on your
computer is 25-pin, you must use the 8-pin-to-25-pin adapter.
Square connector
Square connector
Interface cable