Working With Existing Colors - Xerox DocuColor 12 Color Manual

3
3-26 ColorWise Pro Tools

Working with existing colors

With Spot On, you can view and manage existing groups of colors on the Fiery. You
can also search for a particular color in the Spot On list.
Color groups in the Spot On window appear in order of their priority. Highest priority
is given to color groups at the top of the list. For instance, if two colors from two
different color groups have the same name, the Fiery uses the color from the higher
group and disregards the other color. By managing the priority of colors in this way,
you can maintain several CMYK variants for the same spot color.
T
O REARRANGE THE PRIORITY OF COLORS
1. To rearrange an entire color group, select the desired color group.
To rearrange an individual color, select the desired color.
Individual spot colors are marked with circular color icons.
2. To move the selection up or down in the list, click the Up or Down icon in the toolbar.
3. To paste the selection in a different location in the list, click the Cut or Copy icon in
the toolbar.
The Cut operation is only available for custom colors.
N :
OTE
4. Click the location in the list where you want to paste the cut or copied selection, and
click the Paste icon in the toolbar.
When you paste a default color group or color, a warning message may appear asking
you to rename the selection. Use the menus to choose the desired prefix and suffix for
the new name, and click OK. The pasted selection becomes a custom color group or
color with the specified name.