Saving Changes And Exiting Spot On - Xerox DocuColor 12 Color Manual

3
3-36 ColorWise Pro Tools
4. Place the ED-100 or ES-1000 over the target color, making sure to center the sample
aperture over the color. Press Measure to take the measurement.
The measured CMYK values are imported into Spot On as follows:
• If an individual color is selected in the color list, it updates to the measured color.
• If a group is selected in the color list, a new color with the measured values is created
within the group.
• If the Spot On Color Search window is open, the center patch updates with the
measured values, and the neighbor patches update accordingly.
• If the Set Center Patch Color dialog box is open, the measured values are imported
into the CMYK entry fields.
5. When you are finished taking color measurements, choose Stop from the
Instrument menu.
Spot On closes the connection to the instrument.

Saving changes and exiting Spot On

To enable your spot color matches for use on the Fiery, you must save your edits before
exiting Spot On. This action ensures that all your changes to Spot On color definitions
are stored on the Fiery and available for use when printing documents that contain
spot colors.
The following edits do not require saving to take effect:
• Rearranging the priority level of a color group
• Downloading a color group
• Clearing or deleting a color group
T S O
O SAVE THE POT N COLOR LIST
1. Choose Save from the File menu.
2. Click Close in the upper-right corner of the Spot On main window to exit the utility.