Port Setup Options - Xerox DocuColor 5750 Administrator's Manual

2
2-11 Network Setup options
T N
O EXIT ETWORK
1. When you have finished entering service settings, choose Exit Network Setup.
2. Choose Yes when prompted to save changes.
3. From the main Setup menu, choose another Setup or choose Exit Setup.
Exit Port Setup
Ethernet Setup
Token Ring Setup
Parallel Port Setup
Port Setup
S :
ETUP
For first-time Setup, or if you have configured a new connection, choose Printer Setup
after you finish Network Setup.

Port Setup options

You can enable Ethernet and parallel communication simultaneously. If the Token
Ring option is installed, you can also enable Token Ring. To configure the
DocuColor, choose each port type you use and enter the settings for that port.
Since network setups are nested, the names of higher-level menus are shown in this
chapter to the left of each menu heading.