Configuring A Netware Server For Printing - Xerox DocuColor 5750 Administrator's Manual

3
3-4 Setting up Network Servers
Configuring a NetWare server for printing
The following sections explain how to set up a NetWare file server so that networked
users can print to the DocuColor from their workstations, and the DocuColor can
obtain print jobs from the NetWare server.
For each NetWare file server that you configure, follow these general steps. More detail
is provided in subsequent sections.
• Make sure the server is connected to a functioning IPX network.
• Log in as the Supervisor on a PC connected to the NetWare file server.
• For NetWare 4.x installations, set up an NDS connection (see page 3-6).
• For NetWare 4.x in emulation mode, set the bindery context (see page 3-9).
• For NetWare 3.12 and for NetWare 4.x in bindery emulation, set up a file server, a
print server, and a print queue for the DocuColor (see page 3-12).
With bindery services, you can route all DocuColor print jobs through the same
NetWare file server, or you can configure more than one file server to handle
DocuColor jobs.
The functions you perform on the Novell server, on the DocuColor, and on the client
workstation, are summarized in the following tables. The first table applies to NDS
connections, the second to bindery connections.
Complete the operations in the left column, then the center column, then the right
column.