Xerox DocuColor 5750 Administrator's Manual page 27

1
1-13 Ethernet cable connection
Centronics-type parallel connector
AUI connector for thinnet and thicknet
RJ-45 connector for twisted pair Ethernet
Serial port
SCSI connector for external CD-ROM drive
!
T
O USE THINNET CABLE
1. With the DocuColor turned off, connect the transceiver to the AUI connector on the
2. Connect the thinnet cable to the BNC connector on the transceiver.
3. Configure network servers for printing and then proceed to Setup.
Back view of the DocuColor
Shut down the DocuColor before connecting it to any network device
Do not attach the cable to more than one Ethernet connector on the DocuColor
N :
OTE
at one time.
If the Token Ring option is installed, you can attach an unshielded twisted pair cable to
the RJ-45 connector on the Token Ring board and attach a second cable to the RJ-45
Ethernet connector. For more information on Token Ring, see Appendix A.
:
back of the DocuColor. Press down on the latch to lock the transceiver connection.
Slot for 100BaseT option
Copier connector slot
Slots for Token Ring option
Power switch
.