Tips For Experts-Unix Workstations; Important Note About The Remote Printer Name - Xerox DocuColor 5750 Administrator's Manual

3
3-30 Setting up Network Servers
Tips for experts—UNIX workstations
Setting up the DocuColor in a UNIX environment has the same requirements as
setting up any printer or new device:
• A distinct IP address is needed for the DocuColor as well as for each workstation on
the network.
• You select a DocuColor name that goes with the IP address.
• The IP address must be registered for the network in a host database, and also on the
DocuColor itself.
• The Print queue must be published in Printer Setup.
Lpd printing to the Direct connection is not supported.
The following information pertains especially to the DocuColor:
• DocuColor is a printer controller that understands lpd protocols.
• DocuColor has an internal (machine) name you must determine before you can com-
municate with it successfully.
See the next section for details.

Important note about the remote printer name

Whichever UNIX system you use, the name used for remote printer (or
/etc/printcap
print_5750
The remote printer or
workstation or server to connect to the DocuColor over TCP/IP.
Enter the remote printer name when you set up your Windows NT printer, as the
"Name of printer on that (lpd host) machine" in the Add lpd compatible printer dialog
box (see Getting Started).
file) in configuring the DocuColor is:
name is also used when setting up your Windows NT
rp
rp in the