Xerox DocuColor 5750 Administrator's Manual page 89

3
3-17 Configuring a NetWare server for printing
The steps below summarize installing the utilities on a single workstation. The
installation is described in the Getting Started in greater detail.
T
O INSTALL THE UTILITIES
1. Configure your NetWare server and perform DocuColor Setup.
2. In DocuColor Setup, perform Network Setup as summarized in the tables on
Under Ethernet Setup, perform IPX/SPX Setup.
3. Save changes after Setup.
4. Insert the DocuColor User Software CD in the client workstation and follow the instruc-
tions for installing utilities found in the Getting Started.
5. When the Installer prompts you to select a network protocol, select IPX/SPX.
This choice installs the applications in a folder of your choice and installs a
NET_WIPX.DLL file into the active System folder.
NET_WIPX.DLL is the NetLayer dictionary that the utilities need in order to run
with IPX on Windows 95. You don't change this file.
6. When you are prompted to find the NET_WSCK.INI file, click Next.
The Installer copies a blank configuration file to the Windows directory. The first time
the client runs one of the utilities this file is automatically configured (see Getting
Started).
7. Before running a utility, print a Configuration page.
From the Functions menu on the DocuColor Control Panel, choose Print Pages and
choose Configuration.
8. Find the IPX Ethernet or IPX Token Ring address and record the address exactly.
You will enter this address when you run a utility for the first time (see Getting Started).
9. Start the utility and configure the connection as described in Getting Started.
:
page
3-5.