TVLogic LVM-180A Operation Manual page 4

01 CAUTION
Multi Format LCD Monitor
• Always use set voltage.
- AC 100 ~ 240V (50~60Hz) or DC 12V
• Apply waterproof measures when using the
monitoroutdoors.
• All operating instructions must be read and
understood before the product is operated.
• These safety and operating instructions must
be kept in a safe place for future reference.
• All warnings on the product and in the
instructions must be observed closely.
• All operating instructions must be followed.
• Do not use attachments not recommended by
the manufacturer.
Use of inadequate attachments can result in
accidents.
• This product must be operated on a power
source specified on the specification label.
If you are not sure of the type of power supply
used in your home, consult your dealer or local
power company. For units designed to
operate on batteries or another power source,
refer to the operating instructions.
• The power cords must be routed properly to
prevent people from stepping on them or
objects from resting on them. Check the cords
at the plugs and the product.
• Do not overload AC outlets or extension cords.
Overloading can cause fire or electric shock.
• Never insert an object into the product through
vents or openings. High voltage flows in the
product, and inserting an object can cause
electric shock and/or short internal parts.
For the same reason, do not spill water or liquid
on the product.
4 4
• If any of the following conditions occur, unplug
the power cord from the AC outlet, and request
a qualified service person to perform repairs.
a. When the power cord or plug in damaged.
b. When liquid was spilled on the product or
when objects have fallen into the product.
c. When the product has been exposed to rain
or water.
d. When the product does not operate properly
as described in the operating instructions.
Do not touch the controls other than those
described in the operating instructions.
e. When the product has been dropped or
damaged.
f. When the product displays an abnormal
condition.
Any noticeable abnormality in the product
indicates that the product needs servicing.
• In case the product needs replacement parts,
make sure that the service person uses
replacement parts specified by the manufacturer,
or those with the same characteristics and
performance as the original parts. Use of
unauthorized parts can result in fire, electric
shock and/or other danger.
• Upon completion of service or repair work,
request the service technician to perform safety
checks to ensure that the product is in proper
operating condition.
• The power cord plug shall be connected to a
MAINS socket outlet with a protective earthing
connection.
• When mounting the product be sure to install
the product according to the method
recommended by the manufacturer.
• Do not attempt to repair the product yourself.
Removing covers can expose you to high voltage
and other dangerous conditions. Request a
qualified service person to perform servicing.