Table of Contents
Advertisement
Command
Information Requests
Information
Query part number
Query model name
Query firmware version
Query firmware version with
build
Query detailed firmware
versions
X2$
NOTE:
For
, the following symbols may appear after the version number (see the example below):
*
•
= The firmware version is the current or active version.
•
?.?? = Only the factory firmware version is loaded. This replaces the updated firmware version.
^ = The default factory firmware version is loaded instead of the listed version due to a firmware reset to factory defaults.
•
! = The current firmware version is corrupted.
•
Example response:
Version
Kernel
Cmd.
number
version
0Q1.00-1.00.0000-b115(2.07LX-SW USB PRO -Fri, 16 Jul 2023 15.42 UTC)-1.00.0000-b004*(2.07LX-UCS 303 -Tue, 03 Aug 2023 17:56 UTC)]
Boot
Factory base firmware version
loader
version
KEY:
X!
= Input number
X1^
= Auto-switch timeout (mode 2)
X1(
= Input audio format
X2)
= Unit part number
X2$
= Firmware boot loader version
X2%
= Full firmware version
X2^
= Full firmware version — advanced
Resets
Reset to factory defaults
Reset all IP settings
NOTE: This command includes the 2BOOT
command is not required. The Zpq1
ASCII Command
Host to Switcher
I
N
1I
Q
*Q
0Q
Upload date
and time
Number of the currently selected input.
0-500 seconds in 1-second intervals. Default is 3 seconds.
0 = None (muted), 1 = Digital (default)
60-1797-01
Shown to second decimal place (n.nn)
n.nn.nnnn
Full firmware version with build and any special text (n.nn.nnnn-bnnn)
E
}
ZXXX
E
}
1ZQQQ
}
command (reboot the system and discard network settings) so a separate 2BOOT
]
response is followed by Reconfig
Response
Switcher to Host
X!
X1(
X1^]
In
•Afmt
•Ausw
X2)]
In verbose modes 2 and 3:
X2)]
Pno•
]
UCS-303
In verbose modes 2 and 3:
]
Inf01*UCS-303
X2$]
X2%]
X2^]
Indicator
Model
description
Updated firmware version
]
Zpx
]
Zpq1
]
]
and Boot2
UCS 303 • SIS Communication and Control
Additional Description
X!
View input number
, input
X1(
audio format
, and
X1^
auto-switch mode
selected input.
View the UCS 303 unit part
number.
View the UCS 303 model name.
View current firmware version
X2$
.
Show full firmware version
Show the full firmware version
plus build number and any
X2^
special text (
).
Reset the switcher to factory
default values.
Reset only IP settings to factory
values.
responses.
for the
X2%
.
}
37
Advertisement
Table of Contents
