Table of Contents
Advertisement
Command
Output (continued)
Output Color Bit Depth
Set color bit depth for the
output
Output color bit depth
Status
Output 5 V Mode
Set output 5 V mode for the
output
View output 5 V mode
HDCP Notification
Set HDCP notification for
the output
HDCP notification status
KEY:
X#
= HDCP notification status
X(
= Output color bit depth
X1$
= Output 5 V mode
EDID Minder
EDID Transfer
Import EDID (.bin) to input
(store) slot
Export EDID (.bin) to PC
EDID Other
View input EDID in HEX
Format
View input EDID Native Rate
KEY:
X^
= Slot number on EDID lookup table
X&
= 128 or 256 byte EDID raw HEX (text form) from currently assigned EDID
X*
= Native resolution and refresh rate from currently assigned EDID
ASCII Command
Host to Switcher
E
X(
}
V
BITD
E
}
V BITD
E
X1$
}
HPLG
M
E
}
MHPLG
E
X#
}
N
HDCP
E
}
NHDCP
0 = Off or disabled
1 = On or enabled
1 = Auto, based on sink EDID (default)
2 = Force 8-bit/color
1 = Auto (5 V is enabled when a source with 5 V is present,
2 = 5 V always enabled (default).
E
X^
}
I
,<filename>EDID
E
X^
}
E
,<filename>EDID
E
X!
}
R
EDID
E
X!
}
N
EDID
Response
Switcher to Host
X(]
BitdV
X(]
X1$]
HplgM
X1$]
In verbose modes 2 and 3:
X1$]
HplgM
X#]
HdcpN
X#]
In verbose modes 2 and 3:
X#]
HdcpN
disabled when 5 V source is not detected.)
X^]
EdidI
X^]
EdidE
X&]
X*]
See the EDID table on the next page.
Example: 1920x1080 @ 60 Hz.
UCS 303 • SIS Communication and Control
Additional Description
X(
Set the color bit depth to
for the output.
View the color bit depth for the
output.
Set the output 5 V mode to
X1$
.
View the 5 V output mode
setting.
Enable or disable HDCP
notification for the output.
View HDCP notification status
X#
.
Import a 128 or 256-byte binary
X^
EDID file to input slot
.
Export a 128 or 256-byte binary
EDID file from any position in the
X^
EDID lookup table (
).
HEX data from EDID assigned
X!
to input
.
Native rate of EDID assigned to
X!
input
31
Advertisement
Table of Contents
