Table of Contents
Advertisement
Date — On the Datepicker screen, either select the desired date from the
•
calendar (current month only) or click TODAY to display the current date in the
Date | Time field. To select a different month, click the right and left arrows at
the top of the screen to display the desired month and year.
Time — On the Timepicker screen, click on the hour or minutes above the
•
clock, then click on the desired number on the clock. To display the current
time in the Date | Time field, click NOW. Select the AM or PM radio button.
•
Time Zone — In the Timezone field, select the desired time zone for the UCS
from the drop-down menu (see figure 30,
4.
When finished entering settings, click
dialog box without implementing the settings.
Syncing to NTP servers
To set the date, time, and time zone by syncing the UCS 303 with a network server:
Figure 32.
Syncing the UCS 303 to Network Servers
1.
Select the
Sync to NTP Servers
If desired, select the time zone for the UCS from the Time Zone drop-down list (see
2.
figure 32,
).
2
3.
Enter the IP addresses of up to three network servers from which the UCS can obtain
the date and time (
).
3
4.
Click
(
).
SAVE
4
When syncing to NTP servers is enabled, the UCS syncs to the server at the address
entered in the NTP Server #1 space. If it fails to connect to server #1, it tries server #2, then
server #3.
on the previous page).
3
(
) to confirm them, or CANCEL to close the
4
SAVE
radio button.
UCS 303 • Internal Web Page
57
Advertisement
Table of Contents
