Table of Contents
Advertisement
Status Panel
This view-only panel contains the following unit status information (figure 28,
previous page):
The current date and time (These settings can be configured via the Date and Time
•
panel, see Date and Time settings.)
The time zone in which the unit is operating (This setting can be configured via the Date
•
and Time panel, see Date and Time settings.)
The unit internal temperature in Fahrenheit and Celsius
•
Uptime — The amount of days and hours the unit has been running
•
Date and Time Panel
The following settings are available via the Date and Time panel:
Syncing the date and time on the UCS to the PC
To set the unit date and time to match that of the computer:
Click the
SYNC TO PC
When the sync is completed, the current date and time appear in the
followed by a green check mark (
Figure 29.
NOTE: The Set Date & Time field must be set to Manual. If it is set to Sync to NTP
Servers, the SYNC to PC button is unavailable. Click EDIT, then select the Manual
radio button and click SAVE (see
button (see figure 29,
).
2
Syncing UCS Date and Time to the PC
Syncing to NTP servers
). (Clicking the
button first is optional.)
1
EDIT
Date | Time
on page 57).
UCS 303 • Internal Web Page
on the
2
field,
55
Advertisement
Table of Contents
