Table of Contents
Advertisement
Command
Resets (continued)
Reset all settings except IP
settings
Absolute system reset
NOTE:
Entering this command or performing an absolute system reset via the front panel Reset button (see
page 19) changes the current passwords (whether user-set or the factory-set serial number) to extron.
ASCII Command
Host to Switcher
E
}
ZY
E
}
ZQQQ
Response
Switcher to Host
]
Zpy
]
Zpq
UCS 303 • SIS Communication and Control
Additional Description
Reset all device settings to
factory defaults except IP
settings (communication is
preserved). This command
is recommended for after a
firmware update.
Reset all device settings to
factory defaults except the
firmware version.
Resetting
on
38
Advertisement
Table of Contents
