Table of Contents
Advertisement
Command
IP Configuration (continued)
Set gateway address
View gateway address
Set DNS server IP address
View DNS server IP address
Set date and time
View date and time
Get connection listing
View hardware (MAC)
address
CISG Commands
Setting any values with the CISG command changes DHCP from On to Off, and the Cisg response is followed by a Boot2
NOTE:
response (in verbose mode).
Set IP address
Set IP address and subnet
mask
Set IP, subnet, and gateway
addresses
View IP, subnet, and gateway
addresses
KEY:
X3)
= IP address
X3@
= Gateway address
X3#
= DNS server address
X3$
= MAC address
X3%
= Subnet mask prefix (CISG commands)
X3^
= Date and time
X3&
=
Network interface card (NIC) number
ASCII Command
Host to Switcher
EX3@
}
CS
E
}
CS
E X3#
}
DI
E
}
DI
E X3^
}
CT
E
}
CT
E
}
CC
E
}
CH
E X3&
X3)
}
CISG
*
E X3&
X3)
X3%
}
*
CISG
*
E X3&
X3)
X3%
X3)
}
*
/
*
CISG
EX3&
}
CISG
Format nnn.nnn.nnn.nnn (Default is 192.168.254.254)
Format nnn.nnn.nnn.nnn (Default is 0.0.0.0)
Format nnn.nnn.nnn.nnn (Default is 127.0.0.1)
Format 00-05-A6-XX-XX-XX
Subnet mask prefix (subnet mask bits). In CISG commands, the default
subnet mask 255.255.255.0 is represented as prefix value /24.
Set format: MM/DD/YY-HH:MM:SS Example: 08/17/21-13:51:30
View format: Day of week, day•month•year•hour:minutes:seconds
(Www,DD•Mmm•YYYY•HH:MM:SS) Example: Fri, 21 Jun 2002 10:54:00
1-3 (If the NIC number is not applicable to the UCS 303, an E13 error
message is returned.)
Response
Switcher to Host
X3@]
Ips•
X3@]
X3#]
Ipd•
X3#]
X3^]
Ipt•
X3^]
]
{Number of connections}
In verbose modes 2 and 3:
Icc {Number of connections}
X3$]
In verbose modes 2 and 3:
X3$]
Iph•
X3&
X3)
X3%]
Cisg•
*
/
X3&
X3)
X3%
X3)]
Cisg•
*
/
*
X3&
X3)
X3%
X3)]
Cisg•
*
/
*
X3)
X3%
X3)]
/
*
In verbose modes 2 and 3:
X3) / X3%
X3)]
Cisg•
*
UCS 303 • SIS Communication and Control
Additional Description
X3@
Set subnet mask
for the
unit.
X3@
View subnet mask
Set DNS server address
for the unit.
View DNS server address
Set local date and time, format
MM/DD/YY-HH:MM:SS).
View local date and time,
format Www (day of week),dd,
Mmm,YYYY,HH:MM:SS).
View the number of devices
connected to the unit.
]
View media access code
(MAC) hardware address
for the unit.
Set the product IP address to
X3)
and the subnet mask prefix
X3%
to
on network server
Set the product IP address to
X3)
, and the subnet mask prefix
X3%
to
.
X3)
Set the IP address to
X3%
subnet mask prefix to
X3@
gateway address to
time.
View IP address, subnet mask
prefix, and gateway address at
one time.
.
X3#
X3#
.
X3$
X3&
.
, the
, and
at one
33
Advertisement
Table of Contents
