Table of Contents
Advertisement
Command
IP Configuration, continued
Set front panel lock mode
View front panel lock mode
Set power save mode
View power save mode
status
Set verbose mode
View verbose mode status
NOTES:
•
In verbose response mode, the switcher responds with unsolicited responses for value and setting changes that may result
from a signal change, or a setting adjustment made via another interface.
For example, the switcher can send out a notice of a change in some setting without receiving a query via a PC or a control
system. That change could have been a result of an internal process, a selection made from the front panel, or a selection
made via PCS. This is an example of a verbose (wordy) relationship between the controller and a connected device.
If tagged responses are enabled, all View type commands return the command string plus the data, the same as in
•
responses for setting a value. For example:
E
}
Command:
CN
X1! ]
Response: Ipn •
Verbose Responses
Receive unsolicited
responses (messages)
for all actions initiated via
any source (touchpanel,
port input, internal web
page changes, or
X1)
commands) instead of only
Value
for SIS commands
0
1
2
3
Set unit name
Set unit name to default
View unit name
KEY:
X#
= Power save mode setting
X1)
= Verbose mode
X1!
= Unit name
X1%
= Default unit name
X2!
= Front panel lock (executive) mode
ASCII Command
Host to Switcher
X2!
X
X
EX#
}
PSAV
E
}
PSAV
EX1)
}
CV
E
}
CV
(View unit name)
X1! ]
(tagged response) or
Tagged Responses
Receive tagged responses
to read or view commands.
(Responses to SIS
commands are always
tagged.
Turning tagged responses on
adds tags to the responses to
SIS read requests.)
EX1!
}
CN
E
}
•CN
E
}
CN
0 = Off or disabled (default), 1 = On or enabled
0 = None (default for IP connection)
1
2
3 = Verbose mode and tagged responses for queries
Text string of up to 24 characters. Permitted characters include letters
(A-Z), digits (0-9), and the hyphen or minus sign (-). Blank and space
characters are not allowed. The first character must be a letter, and the
last character cannot be a hyphen.
Model name followed by the last three character pairs of the MAC
address. Example: UCS-303-00-02-3D
0 = Off or disabled (default), 1 = Front panel lockout
Response
Switcher to Host
X2!]
Exe
X2!]
X#]
Psav
X#]
X1)]
Vrb
X1)]
(untagged response)
X1!]
Ipn•
X1%]
Ipn•
X1!]
= Verbose mode
= Tagged responses for queries
UCS 303 • SIS Communication and Control
Additional Description
Enable or disable front panel
lockout (executive mode).
X2!
View front panel lock status
Enable or disable power save
mode.
View power save mode On or
Off status.
X1)
View current verbose mode
X1!
Assign name
for the
UCS 303.
Set the UCS 303 device name
X1%
to default
.
34
.
.
Advertisement
Table of Contents
