Application; Standard Specifications - SMC Networks AWM20-01 Series Operation Manual

2. Application

This product is used for removing oil content and solid foreign matter in the air line as well as
for pressure control.

3. Standard Specifications

Model
Port size
Pressure gauge port size
Fluid
Ambient and fluid temperature
Proof pressure
Max. operating pressure
Set pressure range
Note 3)
Max. air flow capacity
Filtration rating
Outlet side oil mist concentration
Compressed air quality class
Drain capacity
Bowl material
Bowl guard
Construction
Weight
Note 1) Pressure gauge connection threads are not available for product with a square enbedded type pressure gauge or
with a digital pressure switch.
o
Note 2) -5 to 50 C for the products with the digital pressure switch.
Note 3) Inlet pressure is 0.7 MPa and outlet pressure is 0.5 MPa. Flow at 20
and 65% of relative humidity.
The maximum air flow capacity varies depending on the inlet pressure.
Keep the air flow below the maximum air flow capacity to prevent an outflow of lubricant to the outlet side.
Note 4) Based on ISO8573-1:2010 Compressed air - Part 1: Contaminants and purity classes.
The compressed air quality class on the inlet side is [7:4:4].
Note 1)
Note 2)
Without auto drain
Auto drain (N.C)
Auto drain (N.O)
Note 4)
Semi-standard (Steel)
AWM20-D
1/8, 1/4
-5 to 60
0.05 to 0.85MPa
0.1 to 0.85MPa
ー
150L/min(ANR) 330L/min(ANR)
0.3 μm (99.9% filtered particle size)
MAX.1.0mg/m
ISO8573-1:2010[3:4:3]
3
8cm
Polycarbonate
Relieving type
0.23kg
o
C, atmospheric pressure,
-9-
AWM30-D AWM40-D
1/4, 3/8 1/4, 3/8, 1/4
1/8
Air
o
C (with no freezing)
1.5MPa
1.0MPa
0.15 to 0.85MPa
0.1 to 0.85MPa
820L/min(ANR)
3
(≒0.8ppm)
3
25cm
Standard (Polycarbonate)
0.35kg
3
45cm
0.66kg