Pytes E-Box Series User Manual page 26

⚫ Tighten the screws on Busbar or cables to the torque specified in this document.
Periodically confirm whether the screws are tightened, check for rust, corrosion, or
other foreign objects, and clean them up if any. Loose screw connections will result in
excessive voltage drops and batteries may catch fire when the current is high.
⚫ When installing batteries, do not place installation tools, metal parts, or sundries on
the batteries. After the installation is complete, clean up the objects on the batteries
and the surrounding area.
After unpacking batteries, place them in the required direction. Do not place a battery
upside down or vertically, lay it on one side, tilt it, or stack it. Ensure that the batteries do
not fall or get damaged. Otherwise, they will need to be scrapped.
⚫ Slowly push or move battery packs to prevent damage and collision.
To prevent battery packs from falling off, start the pallet truck or forklift after confirming
⚫
that battery packs are securely bound.
⚫ When moving batteries, do not remove protective components such as protective
covers or waterproof caps from battery terminals.
⚫ Exercise caution when moving batteries to prevent bumping and ensure personal
safety.
⚫ Install and secure batteries horizontally from the bottom up and from left to right to
prevent falling over due to imbalance.
⚫ When connecting batteries, ensure that the spring washer on the screw is leveled,
that the protruding part of the terminal on the cable faces outwards, and that the cable
is intact.
Install and secure batteries horizontally from the bottom up and from left to right to
⚫
prevent falling over due to imbalance.
⚫ Ensure that the power circuit breaker is OFF before installing batteries.
⚫ Keep the battery loop disconnected during installation and maintenance.
⚫ Do not use a damaged battery (such as damage caused when a battery is dropped,
bumped, bulged, or dented on the enclosure), because the damage may cause
electrolyte leakage or flammable gas release. In the case of electrolyte leakage or
structural deformation, contact the installer or professional O&M personnel
immediately to remove or replace the battery. Do not store the damaged battery near
other devices or flammable materials and keep it away from non-professionals.
Shanghai Pytes Energy Co., Ltd