Battery Safety - Pytes E-Box Series User Manual

personnel need to check the involved equipment. Operators can begin working only
after safety is confirmed.
⚫ Set a restricted area and prominent signs for working at heights to warn away
irrelevant personnel.
⚫ Set guard rails and warning signs at the edges and openings of the area involving
working at heights to prevent falls.
⚫ Do not pile up scaffolding, springboards, or other objects on the ground under the
area involving working at heights. Do not allow people to stay or pass under the area
involving working at heights.
⚫ Carry operation machines and tools properly to prevent equipment damage or
personal injury caused by falling objects.
⚫ Personnel involving working at heights are not allowed to throw objects from the
height to the ground, or vice versa. Objects should be transported by slings, hanging
baskets, highline trolleys, or cranes.
⚫ Do not perform operations on the upper and lower layers at the same time. If
unavoidable, install a dedicated protective shelter between the upper and lower
layers or take other protective measures. Do not pile up tools or materials on the
upper layer.
⚫ Dismantle the scaffolding from top down after finishing the job. Do not dismantle the
upper and lower layers at the same time. When removing a part, ensure that other
parts will not collapse.
⚫ Ensure that personnel working at heights strictly comply with the safety regulations.
The Company is not responsible for any accident caused by violation of the safety
regulations on working at heights.
⚫ Behave cautiously when working at heights. Do not rest at heights.
Drilling Holes
⚫ Obtain consent from the customer and contractor before drilling holes.
⚫ Wear protective equipment such as safety goggles and protective gloves when
drilling holes.
⚫ To avoid short circuits or other risks, do not drill holes into buried pipes or cables.
⚫ When drilling holes, protect the equipment from shavings. After drilling, clean up any
shavings.

1.5 Battery Safety

Do not connect the positive and negative poles of a battery together. Otherwise, the
battery may be short-circuited. Battery short circuits can generate high instantaneous
current and releases a large amount of energy, which may cause battery leakage,
Shanghai Pytes Energy Co., Ltd