Environment Requirements - Pytes E-Box Series User Manual

which affects the current-carrying capacity and temperature rise.
ESD
The static electricity generated by human bodies may damage the electrostatic-sensitive
components on boards, for example, the BMS board.
⚫ When touching the equipment and handling boards, observe ESD protection
regulations and wear ESD clothing and ESD gloves or a well-grounded ESD wrist
strap.
⚫ When holding a board, hold its edge without touching any components. Do not touch
the components with bare hands.
⚫ Package boards or modules with ESD packaging materials before storing or
transporting them.

1.3 Environment Requirements

Do not expose the equipment to flammable or explosive gas or smoke. Do not perform
any operation on the equipment in such environments.
Do not store any flammable or explosive materials in the equipment area.
Do not place the equipment near heat sources or fire sources, such as smoke, candles,
heaters, or other heating devices. Overheat may damage the equipment or cause a fire.
Install the equipment in an area far away from liquids. Do not install it under areas prone
to condensation, such as under water pipes and air exhaust vents, or areas prone to
water leakage, such as air conditioner vents, ventilation vents, or feeder windows of the
equipment room. Ensure that no liquid enters the equipment to prevent faults or short
circuits.
To prevent damage or fire due to high temperature, ensure that the ventilation vents or
heat dissipation systems are not obstructed or covered by other objects while the
equipment is running.
Shanghai Pytes Energy Co., Ltd