Mitsubishi MELSEC F FX-40DU-E Handy Manual page 111

7.
EDIT MODE
Editing Objects for Individual Screen Settings
7.2.3
DELETE OBJECT
Described here is the procedure for deleting registered objects. The object subject to deletion is
selected by following the procedure in the common considerations on page 83.
Object deletion screen
Select DELETE OBJECT
MODIFY OBJECT
I
BASIC OPERATION
I
DELETE?
Select object to
ENTER
be deleted
Selm
OELETE OBJECT
(a)
ENTER Screen window closes
Object removed from screen
OK
(a) Select DELETE OBJECT and press the [ENTER] key; the message "DELETE?" will be
displayed.
(b) If you are sure you want to delete the object, press [ENTER] while OK is displayed. The
object will be deleted.
Cautions o n Object Deletion
The object to be deleted is selected in accordance with the procedure on page 83 before
.
pressing the [SET] key.
However, in the case of SWITCH, DATA BANK, and CHANGE
SCREEN objects, objects with different settings may appear the same on the screen ([INPUT:
01,
see example below). Before deleting one of these objects, check its settings by using the
MODIFY OBJECT function.
Example:
When selecting the abject
INPUT : 0
for deletion the display is
INPUT : 0
the
same.
CHANGE SCREEN
INPUT:
0
INPUT: 0
DEV :WHEN ON X 0
DEST.:
PCL
SAVED: YES
DEV : NONE
OEST.: NUMBER 1 0
SAVED: NO
But the object settings are
different.