Verizon NCM1100E User Manual page 96

NETWORK SETTINGS
5. Enter the MAC address of the network interface of the computer used
with this DHCP static connection.
6. Click Apply Apply to save changes.
5.1g/ NDP TAbLE
You can view the IPv6 and MAC addresses of each DHCP connection.
To view the IPv6 and MAC addresses for each device: select NDP
Discovery Protocol ) Table
5.1h/ NETWORK CONNECTIONS
Caution: The settings described in this chapter should only be configured by
experienced network technicians. Changes could adversely affect the operation
of your Gateway and your local network.
To view the network connections:
1. From the Advanced
and then click Network Connections.
Table in the Network Settings Network Settings section.
Advanced menu, select Network Settings
Network Connections.
Network Settings from the left pane
NDP (Neighbor