NETWORK SETTINGS
CONFIGURING EThERNET PROPERTIES
To configure the connection:
1.
In the Ethernet
Ethernet page, click Settings
2.
Verify the following information:
General
•
Status – displays the connection status of the network.
Status
•
Network – displays the type name of network connection.
Network
•
Connection Type – displays as Hardware Ethernet Switch
Connection Type
•
Physical Address – displays the physical address of the network card
Physical Address
used for the network.
•
MTU
MTU - specifies the largest packet size permitted for transmissions:
–
Automatic: sets the MTU (Maximum Transmission Unit at 1500).
Automatic
Settings. The configuration page displays.
Hardware Ethernet Switch.