Verizon NCM1100E User Manual page 147

6.1b/ hOW DO I ChANGE ThE PASSWORD ON MY GATEWAY UI?
To change the password:
1. On the main screen, select Advanced
System System section.
2. In the User Settings User Settings section, set a new password.
6.1c/ IS ThE WI-FI OPTION ON bY DEFAULT ON MY GATEWAY?
Yes, your Gateway's Wi-Fi option is activated out of the box.
6.1d/ IS ThE WI-FI SECURITY ON bY DEFAULT WhEN ThE WI-FI
OPTION IS ACTIVATED?
Yes, with the unique WPA2 (Wi-Fi Protected Access II) key, also called the
Wi-Fi Password, that is printed on the sticker on the back of your Gateway.
6.1e/ ARE ThE GATEWAY'S EThERNET PORTS AUTO-SENSING?
Yes. Either a straight-through or crossover Ethernet cable can be used.
6.1f/ CAN I USE AN OLDER WI-FI DEVICE TO CONNECT TO MY
GATEWAY?
Yes, your Gateway can interface with 802.11b, g, n, ac or ax devices. The
Gateway also can be setup to handle only n Wi-Fi cards, g Wi-Fi cards,
b Wi-Fi cards, or any combination of the three.
http://setup.verizon.com/businessinternetgateway |
Advanced, then select System Settings
©2024 Verizon. All Rights Reserved
06 / TROUBLESHOOTING
System Settings in the
147