Verizon NCM1100E User Manual page 22

2.1a/ CONFIGURING DYNAMIC IP ADDRESSING
To configure a computer to use dynamic IP addressing:
WINDOWS 7/8
1. In the Control Panel, locate Network and Internet
Network Status and Tasks Network Status and Tasks.
2. In the View your active networks – Connect or disconnect View your active networks – Connect or disconnect section,
click Local Area Connection Local Area Connection in the Connections
Connection Status window displays.
3. Click Properties Properties. The Local Area Connection Properties window
displays.
4. Select Internet Protocol Version 4 (TCP/IPv4) Internet Protocol Version 4 (TCP/IPv4), then click Properties
Internet Protocol Version 4 (TCP/IPv4) Properties window displays.
5. Click the Obtain an IP address automatically
6. Click the Obtain DNS server address automatically
click OK OK.
7. In the Local Area Connection Properties window, click OK
settings.
8. To configure Internet Protocol Version 6 (TCP/IPv6) to use dynamic
IP addressing, repeat steps 1 to 7. However for step 4, select Internet
Protocol Version 6 (TCP/IPv6) Protocol Version 6 (TCP/IPv6) in the Properties
section for Gateway configuration).
http://setup.verizon.com/businessinternetgateway |
02 / CONFIGURING YOUR VERIZON INTERNET GATE-
Obtain an IP address automatically radio button.
Obtain DNS server address automatically radio button, then
Network and Internet, then select View
Connections field. The Local Area
Properties option (refer to IPv6
©2024 Verizon. All Rights Reserved
WAY FOR BUSINESS
22
View
Properties. The
OK to save the
Internet