Verizon NCM1100E User Manual page 41

2. Enable the protected setup by moving the selector to on
3. Use one of the following methods:
• If your Wi-Fi client device has a WPS button, press the WPS button
on your Gateway for more than two seconds, then click the Start
WPS button in Option 1 WPS
• If your client device has a WPS PIN, locate the PIN printed on the
client's label or in the client documentation. Enter the PIN number in
Option 2 Option 2 on the user interface.
• Click Register Register.
• Alternatively, you can enter the Gateway's PIN shown on this screen
into the WPS user interface of your device, if this PIN mode is
supported by your Wi-Fi device.
http://setup.verizon.com/businessinternetgateway |
Option 1 to start the WPS registration process.
03 / WI-FI SETTINGS
on.
©2024 Verizon. All Rights Reserved
41
Start