Verizon NCM1100E User Manual page 40

bASIC SETTINGS
To enable IoT Wi-Fi link:
1. From the Basic
2. Move the selector to on.
3. If desired, enter a new name and password for the Wi-Fi network or
leave the default name and password that displays automatically.
4. Press Apply Changes Apply Changes to save the changes.
3.1d/ WI-FI PROTECTED SETUP (WPS)
Wi-Fi Protected Setup (WPS) is an easier way for many devices to set up a
secure Wi-Fi network connection. Instead of manually entering passwords or
multiple keys on each Wi-Fi client, such as a laptop, printer, or external hard drive,
your Gateway creates a secure Wi-Fi network connection.
In most cases, this only requires the pressing of two buttons – one on your
Gateway and one on the Wi-Fi client. This could be either a built-in button or
one on a compatible Wi-Fi adapter/card, or a virtual button in software. Once
completed, this allows Wi-Fi clients to join your Wi-Fi network.
To initialize the WPS process, you can either press and hold the WPS button
located on the rear of your Gateway for more than two seconds or use the UI and
press the on-screen button.
You can easily add Wi-Fi devices to your Wi-Fi network using the WPS option if
your Wi-Fi device supports the WPS feature.
To access WPS using the user interface:
1. From the Basic
(WPS). (WPS)
Basic menu, select Wi-Fi
on.
Basic menu, select Wi-Fi
Wi-Fi and then click IoT Network
Wi-Fi and then click Wi-Fi Protected Setup
IoT Network.
Wi-Fi Protected Setup