Verizon NCM1100E User Manual page 93

• IPv6 LAN Configuration (select Stateful IPv6 LAN Configuration
• LAN Prefix LAN Prefix (automatically populated)
• DHCPv6 Client Address Range (start and end) DHCPv6 Client Address Range
• LAN Link Local Address (automatically populated) LAN Link Local Address
• Router Advertisement Lifetime Router Advertisement Lifetime (minutes between 0-150)
• IPv6 Address Lifetime IPv6 Address Lifetime (minutes between 3-150)
• Option: Allow ICMPv6 Echo Request for LAN devices using their Option: Allow ICMPv6 Echo Request for LAN devices using their
Global IPv6 Address from WAN side - requesting an IPv6 address Global IPv6 Address from WAN side
from any available DHCPv6 servers available on the ISP
3. After entering all appropriate IPv6 settings, click Apply changes
changes take effect.
WAN IPv6 with LAN IPv6 Stateless Settings
1. To configure IPv6 LAN Stateless mode with DHCPv6 WAN, select the
Stateless Stateless option on the IPv6 Configuration Controls
below:
http://setup.verizon.com/businessinternetgateway |
Stateful from the dropdown list)
IPv6 Configuration Controls page as shown
©2024 Verizon. All Rights Reserved
05 / CONFIGURING
ADVANCED SETTINGS
Apply changes to have
93