Verizon NCM1100E User Manual page 91

2. Select Enabled Enabled in the Enable IPv6 Support
3. Click Apply Changes Apply Changes to have changes take effect.
Note: The Internet IPv6 service is required for this feature to work over the
internet.
4. To disable the IPv6 service, move the selector to off
Support Support field.
5. Click Apply Changes Apply Changes to have changes take effect.
Once configured using valid IPv6 WAN and LAN configurations, you should
not see any errors when you click on the Apply Changes
System/System Status page will reflect the Gateway's new IPv6 address. System/System Status
You should also see the IPv6 address for all IPv6 supported devices on your local
network displayed on the Basic
icon to access the Device Settings
http://setup.verizon.com/businessinternetgateway |
Enable IPv6 Support field.
Basic/Devices Devices/Devices
Device Settings page for that device.
off in the Enable IPv6
Apply Changes button and the Basic/
Devices page by selecting the Settings
©2024 Verizon. All Rights Reserved
05 / CONFIGURING
ADVANCED SETTINGS
Enable IPv6
Basic/
91