Verizon NCM1100E User Manual page 127

5.3b/ DATE & TIME SETTINGS
You can set the time zone and enable automatic time updates.
To configure the settings:
1. From the Advanced
2. Select Date & Time Date & Time in the System
3. Select the local time zone. Your Gateway automatically detects daylight
saving times for selected time zone.
4. In the Automatic Time Update Automatic Time Update section, click Enable
automatic time update.
5. Define the time server addresses.
6. Enter the IP address or domain name of the time server, then click Apply
to save changes.
7. To refresh the page, click Refresh
http://setup.verizon.com/businessinternetgateway |
Advanced menu, select System.
System section.
Refresh.
System.
Enable on
©2024 Verizon. All Rights Reserved
05 / CONFIGURING
ADVANCED SETTINGS
on to perform an
Apply
127