Verizon NCM1100E User Manual page 103

2. If Windows Internet Naming Service (WINS) is being used, enter
the WINS Server
3. In the Lease time in minutes
network device is allowed to connect to the Gateway with its
currently issued dynamic IP address.
• IP Address Distribution According to DHCP option 60 (vendor class IP Address Distribution According to DHCP option 60 (vendor class
Identifier) Identifier)
DHCP vendor class is related to DHCP option 60 configuration within
the Gateway. Adding option 60 configurations allows a particular
vendor to get a lease from a specified pool of addresses.
Routing Table
You can configure your Gateway to use static or dynamic routing.
• Static routing Static routing – specifies a fixed routing path to neighboring destinations
based on predetermined metrics.
• Dynamic routing Dynamic routing – automatically adjusts how packets travel on the network.
The path determination is based on network/device reachability and the
status of the network being traveled.
To configure routing:
1. In the Routing Table Routing Table section, click the Add new route
and modify the new route configuration page.
http://setup.verizon.com/businessinternetgateway |
WINS Server address.
Lease time in minutes field, enter the amount of time a
05 / CONFIGURING
ADVANCED SETTINGS
Add new route button to display
©2024 Verizon. All Rights Reserved
103