SECURITY & FIREWALL
2.
To apply the rule to:
•
Networked Device or Network Group - select Any
•
Specific devices only – select networked device or User Defined
3.
Select the networked device to be allowed or blocked in the list.
4.
In the Add devices
Add devices, enter the group name, then click Add
network group is automatically added to the Access Control
5.
To block a service, select the internet protocol to be blocked in the
Protocol field.
Protocol
6.
If the service is not included in the list, select User Defined
service, then click Add another entry
7.
Click Add
Add. The service is automatically added to the Access Control
section.
Add another entry.
Any.
User Defined.
Add. The new
Access Control section.
User Defined, define the
Access Control