Verizon NCM1100E User Manual page 79

2. To add a service as an active protocol, enter the application name,
configure its inbound and outbound (triggered/forwarded) port range,
then select the protocol.
3. To schedule the rule, select either Always
Schedule Schedule list box.
4. Click Add to list Add to list. The rule displays in the Rules List
5. Click Apply Changes Apply Changes to save changes.
5.0h/ SChEDULER RULES
Scheduler Rules are used for limiting the activation of firewall rules to specific Scheduler Rules
time periods. The time periods are either for days of the week or for hours of
each day based on activity or inactivity.
http://setup.verizon.com/businessinternetgateway |
ADVANCED SETTINGS
Always or User Defined User Defined in the
Rules List section.
©2024 Verizon. All Rights Reserved
05 / CONFIGURING
79