Verizon NCM1100E User Manual page 131

5.3d/ LED bRIGhTNESS
The Verizon Internet Gateway for Business allows you to set the LED brightness
to turn Off (0%) or stay bright (50% or 100%) using the user interface.
To control the LED brightness:
1. Select LED Brightness LED Brightness in the System
2. Slide the bar to adjust the brightness of the LED.
3. Select your preferred timeout period (in minutes) from the dropdown list
for the LED dimming setting. The Status LED will automatically turn off
after the timeout period.
4. Click Apply Changes Apply Changes to save changes.
Note: The light will activate again on status changes like WPS pairing or loss
of connection.
http://setup.verizon.com/businessinternetgateway |
System section.
©2024 Verizon. All Rights Reserved
05 / CONFIGURING
ADVANCED SETTINGS
131