Verizon NCM1100E User Manual page 24

4. Verify that Ethernet
displays Connected Connected.
5. Click Assist Me Assist Me.
6. Follow the instructions in the Network Diagnostics Assistant.
2.1b/ CONNECTING OThER COMPUTERS AND NETWORK DEVICES
You can connect your Gateway to other computers or set top boxes using an
Ethernet cable or Wi-Fi connection.
EThERNET
1. Plug one end of an Ethernet cable into one of the Ethernet ports on the
back of your Gateway.
2. Plug the other end of the Ethernet cable into an Ethernet port on the
computer.
3. Repeat these steps for each computer to be connected to your Gateway
using Ethernet.
CONNECTING A WI-FI DEVICE USING WPS
Wi-Fi Protected Setup (WPS) is an easier way for many devices to set up a
secure Wi-Fi network connection. Instead of manually entering passwords or
multiple keys on each Wi-Fi client, such as a laptop, printer, or external hard drive,
your Gateway creates a secure Wi-Fi network connection.
In most cases, this only requires the pressing of two buttons – one on your
Gateway and one on the Wi-Fi client. This could be either a built-in button or
one on a compatible Wi-Fi adapter/card, or a virtual button in software. Once
completed, this allows Wi-Fi clients to join your Wi-Fi network.
http://setup.verizon.com/businessinternetgateway |
02 / CONFIGURING YOUR VERIZON INTERNET GATE-
Ethernet, located in the list on the left, is highlighted and
WAY FOR BUSINESS
©2024 Verizon. All Rights Reserved
24