Printing Data You Have Created On A Computer (Optional Kit Required) - Riso CZ180 User Manual

Basic Operations
Printing Data You Have Created on a
Computer (Optional Kit Required)
1
Turn the power switch to
The power switch is located on the lower right side
of the machine.
2
Press the
cator.
Important!:
• When you press the
cator is blinking, the data being received or
waiting for output will be deleted.
3
Check the paper size.
To change the paper, replace the paper on the
Paper Feed Tray. ( p.22)
26

Printing Data You Have Created on a Computer (Optional Kit Required)

(ON).
key to turn on its indi-
key while the
4
Send document data from the computer.
When the machine is receiving data, the
cator blinks.
When data reception is finished, the machine
automatically starts printing according to the set-
tings of the printer driver.
Important!:
• You cannot make various settings including
image processing mode, by operating the
machine. Only the printer driver allows such
settings. For details, see the User's Guide of the
printer driver.
Note:
• The data are printed by the order of receiving.
• You can also use the printer driver to stop the mas-
ter-making or printing process at any point. (For
details, see the User's Guide of the printer driver.)
Tip:
About the
The lighting / blinking of the
you of the conditions of this machine and data
receiving conditions.
Lightning of
Indicator
blinking (fast)
blinking (slow) Waiting for output
indi-
lighting
going-out
Note:
• When you press the
is blinking, you can delete the data waiting for
output or being received.
indicator
indicator informs
Description
Receiving
instruction. (The
received data, after
being expanded, is
waiting for output
instruction.) Or the
expanded data is in the
master-making or
printing process.
The data from your com-
puter can be received.
The receiving of data is
disabled.
key while the
indi-
lamp