Printer; Support; Parameters - GARANT VG BASIC Instruction Handbook Manual

GARANT VG Basic pre-setting device
de
Language
en
cs
8.3.

PRINTER

da
i
Label writer LabelWriter 450 (Article no. 085505 LW450) and Brother QL-800 are pre-installed and ready for use on the pre-
setting device.
 Use only these printers, no other printers can be installed.
es
ü Printer connected to the panel PC with a USB cable, power cable connected and printer switched on.
ü Printer selected in the Windows operating system using System Settings/Devices and Printers.
ü Suitable label size and alignment selected in the Windows operating system using System Settings.
fi
1. Insert labels into the printer and check the alignment.
Print label
2. Press
3. After acknowledgement, print the displayed measurement values.
fr
8.4.

SUPPORT

hr
Online support
i
Contact Hoffmann Group Customer Service in order to obtain updates or further assistance by means of remote access.
ü Internet connection must be set up and active via WLAN.
hu
ü The serial number will be displayed.
To the online support page
1. Press
it
2. Request the password by phone, and input it via TeamViewer.
3. Permit remote control of the pre-setting device by Customer Service.
8.5.

PARAMETERS

i
lt
The password cannot be changed.
nl
pl
Parameters
ro
ru
sl
1. Release the parameter functions by inputting the password "garant".
2. Acknowledge by pressing Enter on the virtual keyboard.
sv
52
German English
, assign a name to the tool.
Enable parameter functions for
Password
Russian
.
calibration:
Chinese