Start Screen Of The Measurement Software; Transport, Place Of Erection - GARANT VG BASIC Instruction Handbook Manual

 It may not be removed or covered.
 If it is damaged or becomes very dirty, fit a new nameplate. Contact Hoffmann Group customer service.
 Located on the left side of the pre-setting device housing.
1 Power consumption
2 Serial number
3 Manufacturer's address
4 Brand
4.6.

START SCREEN OF THE MEASUREMENT SOFTWARE

8
7
6
5
Fig. 4: Start screen of the measurement software
1 Adapter currently selected
2 Adapter sorting number (ID)
Tab. 1: Adapter display
5 Settings
6 Measuring function overview
Tab. 2: Help and special functions
5.

Transport, place of erection

WARNING
Pre-setting device falling or tipping over
Crush hazards, laceration hazards and impact hazards for the body and limbs.
» Use transport vehicles, hoists and lifting tackle designed to accept the weight and size of the pre-setting device, and
which satisfy the requirements for safe transport.
» Note the tare weight of the pre-setting device.
» When the pre-setting device is lifted, do not walk beneath it or reach beneath it.
» Avoid shaking, impacts and point loading on the housing.
» Do not use the monitor arm, tower, transport restraint or optical unit as lifting points.
» When lifting the base unit, do not subject the tower to any tipping or twisting movements.
If delivered on a pallet, perform transport to the place of erection on the pallet using a suitable load carrying device.
HSK50
HSK63
SK40
SK50
New adapter
4
5 CE mark
6 Article number
7 Build year
8 Pneumatic system working pressure
1 2
SK 40
ID: 1000
X mm
44,986
R
Radius
Notes
Calibrate the adapter
3 Edit the adapter selected
4 Creating a new adapter
7 Adapter overview and creation
8 Keyboard
3
mm
Z
-2,919
www.hoffmann-group.com
de
en
cs
da
es
fi
fr
hr
hu
it
lt
nl
pl
ro
ru
sl
sv
41