Dynamic Focus Display; Delimiting A Live Image And Measurement Range - GARANT VG BASIC Instruction Handbook Manual

Radius template
1. Select the radius template or angle template.
2. Using the panel PC touch screen to move the radius or angle to the desired position.
3. Use the slider or +/- to move the radius or angle to suit.
4. If desired, print a label.
Radius
Angle
2.00 mm
7.2.5.

Dynamic focus display

i
Focus display for focussing on a feature of a tool. Always active when in measurement mode.
1. Rotate the tool until the black measurement beam has moved as far as possible into the green coloured area.
2. As soon as the measurement beam has wandered off to the left, rotate the tool back until the maximum deflection is
once again achieved.
» Tool focussed by computer.
7.3.

DELIMITING A LIVE IMAGE AND MEASUREMENT RANGE

i
Every measurement function operates across the entire range of the live image; the measurement range can be restricted.
1. Press with a finger or click with the mouse cursor on the touch screen of the live image; the blue rectangle will appear.
» The measurement range can be moved and its size can be changed.
2. To change the size, briefly click on the desired position in the live image.
3. To move the position, keep the blue rectangle depressed.
4. To end the restriction of the measurement range, reselect the measurement function.
Angle template
Radius or angle
template
Fine adjustment + /-
Quick adjustment using the
slider
www.hoffmann-group.com
de
en
cs
da
es
fi
fr
hr
hu
it
lt
nl
pl
ro
ru
sl
sv
49