Siemens SIMOTICS T-1FW6 Operating Instructions Manual page 26

Fundamental safety instructions
2.4 Residual risks of power drive systems
3. Hazardous shock voltages caused by, for example:
– Component failure
– Influence during electrostatic charging
– Induction of voltages in moving motors
– Operation and/or environmental conditions outside the specification
– Condensation/conductive contamination
– External influences/damage
4. Electrical, magnetic and electromagnetic fields generated in operation that can pose a risk to
people with a pacemaker, implants or metal replacement joints, etc., if they are too close
5. Release of environmental pollutants or emissions as a result of improper operation of the
system and/or failure to dispose of components safely and correctly
6. Influence of network-connected communication systems, e.g. ripple-control transmitters or
data communication via the network
7. Motors for use in potentially explosive areas:
When moving components such as bearings become worn, this can cause enclosure
components to exhibit unexpectedly high temperatures during operation, creating a hazard
in areas with a potentially explosive atmosphere.
For more information about the residual risks of the drive system components, see the
relevant sections in the technical user documentation.
24
1FW6 built-in torque motors
Operating Instructions, 09/2022, A5E52220812B AA